To fit other chassis, you can custom fit by drilling two small holes

in an open space on the circuit board (do not drill on the circuits) .

HOW TO INSTALL IT?
There

are two parts. One side is mounted onto the chassis (Chassis Side

Mount), the other side is mounted onto the body (Body Side Mount). The

connection wire is included.

Both sides come with a magnet to hold your body tightly together.

On the Chassis Side Mount, connect the battery side of the receiver to the mount. This is the power source. There are five prongs that are on this mount. The five prongs are spring loaded to connect to the five silver pads of the Body Side Mount.

Install the Body Side Mount with the silver pads onto the body. To get the mount onto the body securely, we recommend using a thin EVA material and glue it onto the body. This prevents using screws that will destroy the body. If you don't mind having holes on your body, you can simply use two bolts to mount the Body Side Mount.

The wire on the Body Side Mount connects to all of the LED lights installed on the body.

Once the power is ready and the prongs and the silver pad connect, your

LED lights will light up. There will be no more wires hanging on your

body!

There is a switch on the Chassis Side mount where you can turn on/off the power to the unit.

ARE MAGNETS STRONG?
The

magnets included are large and strong and will hold your body in place

well. The magnet well holds the body in place from side and

forward/reverse movement.

WATERPROOF
The entire unit is waterproof. Proper maintenance is required for copper corrosion.

Includes:
1x Chassis Side Mount
1x Body Side Mount
2x male plug cable
2x female plug cable