Orlandoo Hunter 1/32 RWD Micro Roll Cage Trophy Truck Kit Red Body

1/32 trophy truck, 3D printing + Pc vacuum injection frame. The front suspension is a double A-arm coil spring independent suspension, and the rear is a four-link integral bridge suspension that simulates a double-knife arm connection. the front and rear suspensions are equipped with two shock absorbers on each side - a damped inner spring damper cartridge and an outer coil spring shock absorber. The front and rear suspensions have restored anti-roll bars.

Features:
8mm thick soft shell, red, blue, and transparent three optional
High-strength PC material integrated pipe frame body
Front double fork arm coil independent spring suspension
Rear closed cutter arm four-link integral bridge structure
Each wheel is equipped with two shock absorbers -- imitation damping internal spring shock absorbers and external coil spring shock absorbers
Front and rear-embedded anti-tilt bars
Fire extinguisher, oil drum, fan, dashboard, and other decorative parts

Specifications:
Scale: 1/32
Length: 168mm
Width: 79mm
Height: 59mm
Wheelbase: 104mm
Color: Red

Needed to Complete:
AS0022 2.2g Low Voltage Servo
TS0002 ESC
NR3000 N30 Motor
Battery: your choice, 7.4v (2S) LiPo, 240Mah – 300Mah with dimensions of L40.5mm x W24.5mm x H13mm
Radio: Your choice of 2ch 2.4Ghz system – you will need a micro receiver
Note: Ensure you choose matching plugs for your motor, ESC and battery if you want a plug’n’play experience – otherwise soldering will be required.